Veko VEDVR 2108 Instrucciones de operaciones descargar pdf (Pagina 33)

EcoSense

Serial Ports

This menu allows conguration of the unit’s Serial ports. Refer to ‘Installing the Unit’ for installation

information.

Serial Port There are two serial ports available.

Port Cong The serial ports can be congured to specic uses.

Select from:

None Switches port off

Debug Sets port for serial communications

PPP Sets port for Point to Point Protocol

Telem Sets port for Telemetry purposes

Comm Sets port for Comms purposes

Interface Type Serial port 1 is congured for RS232 communications. Serial port

2 is congured for RS485 communications.

Baud/Parity/Data/Stop/Flow Control

These options allow the Serial port communication settings to

be congured.

Note: When a telemetry protocol is selected, these settings will default to pre-determined values

and should not normally be altered.

Protocol This is a drop down list of serial telemetry protocols supported by

the unit.

Note: Refer to ‘Appendix E’ for a full list of supported telemetry protocols.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 119 120

Sin comentarios

Veko VEDVR 2108 Instrucciones de operaciones Pagina 33